CPR Repairs corroded Fuel Piping aboard ship

CUSTOMER: Shipping company in Ontario

PROBLEM: Fuel Piping was corroding away especially at the floor joint.

Fluid Grade Products were used in conjunction with reinforcement tape.

SUBSTRATE: Carbon Steel

CPR: Piping was cleaned up with a wire brush and the substrate was hand grinded. First application of Fluid Grade was followed by a wrap and then two more coats of the Fluid Grade Materials.


Loose rust was removed and pipes were prepared.

First coat of Fluid Grade was applied followed by a reinforcement wrap and second coat.

Third coat of fluid grade was applied.

Material was left cure with heat from a distance to keep the pipes warm.